- Rycote® Lyre onboard shock mounting
- Acoustically matched true condenser capsules
- Heavy-duty, lightweight aluminium construction
- Balanced professional XLR output
- 9V battery or Phantom Power (P48 - via miniXLR)
- High Pass Filter
- High Frequency Boost
- 12 Months Warranty plus extra 10 years when registered on RODE website
A new standard in immersive audio is now here to rock our world. Featuring the Stereo VideoMic X Microphone from Rode, an ultimate broadcast-grade stereo microphone that features acoustically matched true condenser capsules. Each of the capsules is supported by the Rycote® Lyre® onboard shock-mounting system, which gives isolation from knocks, bumps, and vibration. It is built with a robust heavy-duty, lightweight aluminum construction ideal for hardcore use. Balanced professional XLR output, another first for the VideoMic range is available on the side of the body with the RF shielded 3.5mm stereo output cable. The Stereo VideoMic X can be powered up to 30 hours by 9V battery or by Phantom Power (P48 - via miniXLR) using XLR connectivity. Three stage high-pass filters are available at 0, 75, and 150Hz to cut out any annoying low frequency audio like air conditioners or traffic noise. High Frequency Boost is also available to set an enhancement to the mic’s high-frequency sensitivity. Level adjustment offers three stages from -10dB PAD for loud recording to +20dB boost for clean audio signal.
Product Features in Detail
Acoustically matched true condenser capsules
An acoustically matched pair of 1/2" externally polarised, true condenser capsules provide studio-quality, immersive stereo sound.
Rycote® lyre onboard shock mounting
Integrated single-piece thermoplastic shock mounting, designed to minimise handling noise at a capsule-level.
Heavy-duty, lightweight aluminium construction
Robust metal construction that only weighs 300g (10oz).
9v or phantom power (p48)
The stereo videomic x can be powered by 9v battery (up to 30 hours), or via p48 phantom power using xlr connectivity.
Balanced professional xlr output
In addition to standard 3.5mm stereo output, the stereo videomic x provides balanced output via the professional xlr standard (via minixlr - not included).
High frequency boost
An innovative setting that will allow the stereo videomic x to enhance its high-frequency sensitivity when using the included wind shield.
High pass filter
Three stage high-pass filter at 0/75/150hz, to cut out any unwanted low frequency audio such as traffic noise and air conditioners.
Three stage level adjustment, offering a -10db pad for recording loud sound sources and a +20db level boost to provide a cleaner audio signal to your camera/recording device.
Included pop shield and wind shield (not shown)
High quality environmental protection for both indoors and outside.
Included in the Box
RODE Stereo VideoMic X Microphone
SC2 TRS cable
12 months Warranty plus extra 10 years when registered on RODE website
This RODE Stereo VideoMic X Microphone comes with 12 months Warranty plus extra 10 years when registered on RODE website.
Our products are sourced from authorised Australian suppliers and therefore come with genuine Australian warranty.
Camera Warehouse does not participate in 'Grey Market' or 'Parallel Import' activities.
Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter Capsule 0.50" Polar Pattern Cardioid Address Type End Frequency Range 40Hz - 20kHz (selected HPF @ 0, 75Hz, 150Hz) Output Impedance 200Ω Maximum SPL 143dB SPL (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 12dB-A Power Options 9V Battery + 48V phantom power Weight 300gm Dimensions 102mmH x 118mmW x 100mmD Output Minijack Output TRRS Output