Rode NT55 Microphone
- Externally biased condenser
- 1/2" gold sputtered
- Interchangeable NT45-O omnidirectional capsule used by Cardioid or Omni
- Three position High-Pass Filter - flat, 75Hz and 150Hz
- Three position PAD - 0dB, -10dB and -20dB
- Low noise
- Surface mount circuitry
- Available as Certified Matched Pair
The NT55 utilises the 1/2" gold sputtered true externally biased condenser used in the internationally renowned RØDE NT5. The NT55 is a low-noise, balanced output microphone, exhibiting a wide dynamic range and full frequency response. It features three position PAD - 0dB, -10dB and -20dB and three position High-Pass Filter - flat, 75Hz and 150Hz and includes the interchangeable NT45-O omnidirectional capsule used by Cardioid or Omni with surface mount circuitry. The NT55 is available as a single microphone or as an acoustically matched pair.
Small-diaphragm, true-condenser cardioid microphone
Like the NT5, the RØDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule.
All around recording
Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.
Ideal for use as an indoor dialogue microphone
Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.
Available as Certified Match Pair
Finished in durable satin nickel, the NT55 available as a single microphone or as an acoustically matched pair.
Designed and made in Australia
The RØDE NT55 Condenser Microphone is designed and made in Australia.
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter with bipolar output buffer |
Capsule | 0.50" |
Polar Pattern | CardioidOmnidirectional - picks up all sides equally |
Address Type | End |
Frequency Range | 20Hz - 20kHz |
Output Impedance | 100Ω |
Maximum SPL | 136dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level | 8.0dBu (@ 1kHz, 1% THD into 1KΩ load) |
Sensitivity | -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 15dB-A |
Power Options | +48V phantom power |
Weight | 110.00gm |
Dimensions | 145.00mmH x 20.00mmW x 20.00mmD |
Output | XLR Output |
RODE NT55 Microphone
Interchangeable Omnidirectional Capsule NT45-O
Durable Microphone Clip RM5
