- Large 1” HF1 gold sputtered capsule
- Three position variable polar pattern - Omni, Cardioid or Figure 8
- On body control of polar pattern, HPF and PAD
- Three position PAD - 0dB, -5dB or -10dB
- Three position variable High-Pass Filter - Flat, 40Hz or 80Hz
- Ultra low noise
- Internal capsule shock mounting
- 12 Months Warranty plus extra 10 years when registered on RODE website
NT2-A Microphone is a multi-pattern 1" dual condenser microphone with a large 1” HF1 gold sputtered capsule, featuring three position variable polar pattern - omni, cardioid and figure 8, and on body control of polar pattern HPF and PAD. Not only that this mic offers variable patterns but also features three positions PAD of 0dB, -5dB or -10dB and three position variable High-Pass Filter - Flat, 40Hz or 80Hz. It also has ultra-low noise, self-noise of only 7dB (A) making it renowned to be ultra-quiet.
Product Features in Detail
Large 1" capsule studio microphone
The NT2-A carries on the tradition forged by the now legendary RØDE NT2. A professional large 1" capsule studio microphone incorporating three-position pick-up patterns, pad and high pass filter switches conveniently located on the mic body.
Flexibility and superlative audio characteristics
The frequency and transient response of this transducer has been voiced to complement today's modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50s and 60s. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available.
SM6 shock mount, dust cover, microphone cable and DVD
Supplied with the SM6 shock mount, dust cover, microphone cable and DVD hosted by Grammy-nominated engineer and producer John Merchant showing a range of recording techniques specific to the NT2-A.
Studio grade pop shield and shock mount
A studio grade pop shield and shock mount is included, along with a premium 20' microphone cable, and dust cover.
Designed and made in Australia
The RØDE NT2-A microphone is designed and made in Australia.
Included in the Box
RODE NT2-A Microphone
Shock Mount with Detachable Pop Filter SM6
XLR cable (6m)
Microphone Dust Cover
12 months Warranty plus extra 10 years when registered on RODE website
This RODE NT2-A Microphone comes with 12 months Warranty plus extra 10 years when registered on RODE website.
Our products are sourced from authorised Australian suppliers and therefore come with genuine Australian warranty.
Camera Warehouse does not participate in 'Grey Market' or 'Parallel Import' activities.
Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter with bipolar output buffer Capsule 1.00" Polar Pattern CardioidFigure 8 - picks up from the front and rear and rejects sidesOmnidirectional - picks up all sides equally Address Type Side Frequency Range 20Hz - 20kHz Output Impedance 200Ω Maximum SPL 147dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level 16.0dBu (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 7dB-A Power Options +24V phantom power+48V phantom power Weight 860.00gm Dimensions 209.00mmH x 55.00mmW x 55.00mmD Output XLR Output