- Large diaphragm, end-address condenser microphone
- HF2 1” capsule with gold plated diaphragm
- On-Air indicator LED
- Ultra-low noise
- Internal pop-filter
- 20Hz-20kHz response
- Voice tailored low-cut feature
- 12 Months Warranty plus extra 10 years when registered on RODE website
Like its name suggests, this RØDE Broadcaster microphone was specifically designed for 'ON-AIR' applications where wide frequency response and low distortion are demanded. It is a large diaphragm, end-address condenser microphone made to deliver the ultimate performance for broadcast vocal applications. Its built is made out of HF2 1” capsule with gold plated diaphragm with internal pop-filter, voice tailored low-cut feature, and On-Air indicator LED. It gives ultra-low noise and even filters low-end noise such as air conditioners and outdoor traffic thanks to its 20Hz-20kHz response high pass filter at 75Hz.
Product Features in Detail
Large diaphragm, end-address condenser microphone
The RØDE Broadcaster is a large diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast vocal applications.
Emphasised proximity effect
Its rich, full quality tailored response has an emphasised proximity effect that has made it a standard in radio stations the world over. It is equally suitable as a voice-over microphone for film and television
Designed to minimise plosives sounds
The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output. In addition to the Broadcaster's native 20Hz-20kHz response, a selectable high-pass filter at 75Hz is available which will prevent low-end noise such as air conditioners and traffic from being recorded.
'On-Air' indicator on the body
The Broadcaster features an innovative 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.
Designed and made in Australia
The RØDE Broadcaster Microphone is designed and made in Australia.
Included in the Box
RODE Broadcaster Microphone
Padded Zip Pouch ZP1
Ring-Mount Microphone Stand
12 months Warranty plus extra 10 years when registered on RODE website
This RODE Broadcaster Microphone comes with 12 months Warranty plus extra 10 years when registered on RODE website.
Our products are sourced from authorised Australian suppliers and therefore come with genuine Australian warranty.
Camera Warehouse does not participate in 'Grey Market' or 'Parallel Import' activities.
Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter with bipolar output buffer Capsule 1.00" Polar Pattern Cardioid Address Type End Frequency Range 20Hz - 20kHz Output Impedance 40Ω Maximum SPL 128dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level 2.0dBu (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 14dB-A Power Options +24V phantom power+48V phantom power Weight 577.00gm Dimensions 167.00mmH x 50.00mmW x 65.00mmD Output XLR Output