Phottix Indra500LC 500W Studio Light for Canon
- 500W/s flash power output
- 15 channels in 5 flash groups
- 8 adjustable power stops
- 12 Months Genuine Australian Warranty with Adeal
- 500W/s flash power output
- 15 channels in 5 flash groups
- 8 adjustable power stops
- 100 metres signal range
- High Speed Sync of up to 1/8000s
- Stroboscopic mode
- Compatible with the Phottix Laso TTL Transmitter
- Can be used with Canon RT Speedlites
- Works with the Canon Speedlite Transmitter
- Supports Canon non-RT flashes
- Allows Remote TTL and Manual Control
- 12 Months Genuine Australian Warranty with Adeal
The Phottix Indra500LC 500W Studio Light for Canon is the first studio light system that can be used with Canon RT Speedlites. It also works with the Canon Speedlite Transmitter and supports Canon non-RT flashes. With a 500W/s flash power output, it allows the triggering of multiple flash heads through its 15 channels in 5 flash groups. The intensity of the light can also be optimized using the 8 adjustable power stops. Compatible with the Phottix Laso TTL Transmitter, this studio flash is equipped of High Speed Sync of up to 1/8000s as well as Stroboscopic mode for special effects. With a 100 metres flash range, the Phottix Indra500LC 500W Studio Light allows Remote TTL and Manual Control.
Product Features in Detail
Anything goes
Phottix presents the first studio light system compatible with Canon's radio flash system. The Indra TTL was the next generation of Phottix's innovative TTL products -the Indra500LC takes that one step further- incorporating the radio control and triggering the Canon RT and the Phottix Laso triggering systems. The Indra500LC gives photographers 500W/s of TTL power, opening up new possibilities and allowing photographers to shoot in shutter and aperture priority modes with incredible power.
High Speed Sync
With the Phottix Indra500LC TTL’s High Speed Sync function photographers can shoot at higher sync speeds allowing wider apertures while still being able to control ambient light. In manual mode the Indra500LC offers 8 stops of power adjustments – from full power to 1/128 in 1/3rd stop increments. With Stroboscopic Mode, the Phottix Indra can be used for special effect and creative shooting with flash frequencies of 1-100HZ and flash counts of 1-100 times.
Built-in Triggering
The Phottix Indra500LC TTL has the power and control of the Canon RT and Phottix Laso triggering systems built-in. Switch between TTL and Manual modes, adjust EV and manual power levels and use high speed sync, all from the Canon ST-E3, compatible Canon RT Speedlites and the Phottix Laso Transmitter – no extra hardware is needed.
Supports Older Canon Non-RT Flashes
One of the best things of the Phottix Laso Triggering system is its ability to incorporate older non-radio Canon flashes into a photographer’s workflow. There’s no need to set aside older non-RT flashes such as the venerable 580 EXII – add a Phottix Laso Receiver and gain the ability to control and trigger it. Add legacy flashes, Canon RT-enabled flashes – and the Phottix Indra500 LC for a complete lighting solution.
Included in the Box
Phottix Indra500LC 500W Studio Light for Canon
5" Reflector
Phottix Indra Li-Ion Battery Pack
Charger
Cables
12 Months Genuine Australian Warranty with Adeal
Warranty Information
This Phottix Indra500LC 500W Studio Light for Canon comes with 12 Months Genuine Australian Warranty with Adeal.
Our products are sourced from authorised Australian suppliers and therefore come with genuine Australian warranty.
Camera Warehouse does not participate in 'Grey Market' or 'Parallel Import' activities.
| Dimensions | Diameter: 14cm; Length: 26.7cm; Height: 19cm |
| Weight | 2.1kg (excluding Studio Light Power Cable) |
| Channel | 15, 5 Groups |
| Stroboscopic Flash | Frequency: 1-100Hz, Flash Count: 1-100 times |
| High Speed and Second Curtain Sync | Supported* 1/8000s Sync Speed |
| Heat Dissipation Method | Automatic temperature-based cooling fan |
| Radio | Approx. 100m |
| Sync Port | 3.5mm Sync Port, USB Port for Firmware Upgrades |
| Wireless Receiving Modes | Laso, Opt-Slave |
| Wireless Connectivity Method | Radio Frequency and Optical pulse |
| Power Adjustment | In 1/3 stop or full stop increment |
| Modeling Light Power | Approx. 4.5w |
| Max Power | 500 Ws |
| LCD Display Sensor Setting | Orientation sensor - Display automatically rotates if used inverted |
| Modeling Light Modes | Off, Manual (9 adjustment levels) |
| Adjustable Power Stops | 8 Stops (4-500Ws) |
| Input Power | Phottix Indra Battery Pack: 14.4V/5Ah, 360 full power flashes (High-Speed Mode) |
| Display | 320x240 TFT LCD display, 3 color schemes |
| Colour Temperature | 5500±200K (Color mode) |
| Flash Modes | TTL, Manual (M), Multi |
| Recycling Time | With Phottix Indra Battery Pack: 0.1-2.5s |
