Nissin Di866 Mark II Camera Flash

The Nissin Di866 Mark II Flash, with GN60 (105mm)/GN40 (35mm) at ISO 100 and Wireless Master/Slave TTL Functionality, provides photographers with the power needed to light up a wide variety of shooting situations. It is compatible with Canon and Nikon Cameras. It provides an easy-to-read, two-way Color Display & Multi Flash Mode which helps ensure spontaneous operations. It is capable of operating with a Zoom Range of 24-105mm (18mm with Panel) and can Tilt Upward 90° and Rotates Left 90° & Right 180°. It runs on 4 AA Batteries, and when it is operated with a Nissin Power Pack Pro 300, you will get 300 full-power flashes with a recycle time of 0.1-5.5 seconds. 

Product Features in Detail

Quieter operation
New transmission motor significantly reduces the operating noise, the volume level (70dB or less) is achieved.

High sensitivity wireless sensors
The high performance wireless sensors cover the distance of 25 meters (Direct remote sensing range). The high-sensitivity sensors, multi-lamp lighting can be performed easily at various locations.

Durable hot-shoe mounting
The metal hot shoe mount can be easily to install and reduce the chance of damage caused by installation.

Color and Auto Rotate Display bears simple and user friendly features of our design concept
En01 The Color Display will automatically follow camera angle in different position and six icons interface gives user friendly operation and representing different menus – Auto, TTL, Manual/Av, Multi, Wireless TTL (Master/Remote) and Customer Setting.

Various Functions – TTL, Manual/Av, Multi Flash
En02 TTL: Supporting Canon E-TTL/E-TTL II , Nikon i-TTL/i-TTL-BL and Sony ADI/P-TTL. Flash light is automatically controlled by the camera but the flash exposure value can be compensated.
Manual: Flash power can be adjusted manually at 22 levels, from full power to 1/128 power at every 1/3 stops. The appropriate distance to the subject is shown in the display in accordance with the aperture value set on the camera.
Av priority: The flash light can be automatically controlled by the photo sensor built-in the flash unit instead of TTL metering. The F. Stop can be set from F1.4~F16. The distance at the F-stop set on the flash and camera is shown in the display.
Multi Flash: The power ratio can be set from 1/8 to 1/128.

The best solution for off camera flash technique
En03 The Di866 Mark II Wireless TTL system support Canon/Nikon/Sony wireless TTL system. Di866 Mark II can be used jointly with Canon, Nikon and Sony original flash as either Master and Remote (Slave).
The Di866 Mark II also supports digital (pre-flash system) and analogue (film type camera’s flash and/or studio flash under both of Manual and Av. priority mode.
Multi-Flash: Repeating flash for multi-exposure image in one frame.
The power ratio can be set from 1/8 to 1/128.

Sub-Flash
04 The Di866 Mark II provides an extra small flash (GN12) below the main flash. This small flash gives a fill-in light while bouncing the main flash. Bouncing the light may shadow the underside of face, and this fill-in flash brightens up the shadow. The power ratio of Sub-Flash can be set from 1/1 to 1/128 

Auto Zoom
08 Auto Zoom covers 24~105mm focal range. Light diffusing panel covers wide 18mm (35mm format)

My TTL
05 TTL exposure level is accurately calibrated for standard balance in accordance with Nissin’s standard. If any adjustment is however required, or if you like to set your own preferable level, it can be adjust for about +3Ev. ~-3Ev. by every 1/3 step.

Quick Loading Battery Magazine
06 The Di866 Mark II has battery magazine system same as Di866 professional and Di466. A convenient battery magazine provides all four AA-size batteries slot in the same direction, so that the batteries can be correctly inserted without fail even in the poor light condition.

External Service Box
External Power Pack Socket – Di866 Mark II supports Nissin Power Pack PS 300.
X terminal – Di866 Mark II has X-terminal socket for flash synchronization.
USB Service Port – Di866 Mark II provides a USB port to update the latest firmware.

Rear curtain sync and High speed shutter
11 In Rear curtain sync., the flash fires just before the rear curtain closed. By using this function at slow shutter speed, a moving subject will appear with such moving marks behind. 
High speed sync. is recommended for daylight flash photography.