Micnova Trigger for Canon Light / Motion and Sound
- 3 in 1 Solution for Intense Light, Infrared (IR) Image & Sound Trigger
- 0.1ms Response Time from Lightning Event to Shutter Release
- 5m PIR Passive Motion Triggering Capability in Motion Mode
- Sets Camera to Manual Focus and Focus to Infinity
The Micnova Trigger is a 3 in 1 solution for intense light, infrared (IR) image and sound trigger. It’s lightning mode, the device will trigger camera’s shutter release within approximately 0.1 milliseconds after a lightning burst reaches the sensor, allowing you to capture striking images of storms or fireworks. Under motion mode, if the gear detects any wildlife/human movement using the IR motion sensor, it will trigger the camera once it detects any movement. The sound mode sets the device to trigger the camera once it detects any sound, allowing you to capture images of animals in their natural environment.
Product Features in Detail
Lightning Trigger
There is a great challenge in capturing lightning when it strikes. With this trigger things become much easier. Once the trigger detects a flash or burst of light it will activate the camera's shutter within 0.1ms.
Motion Trigger
The unit's motion triggering modes uses a Passive Infrared (PIR)sensor. It detects movement of infrared (IR) sources, such as humans or animals, from up to 5 meters away, and smaller wildlife at a closer range. When the sensor detectsIR motion within its field of view (Horizontal: 94°, vertical: 82°), it will trigger your camera shutter.
Sound Trigger
The sound trigger mode uses an insert microphone sensor. It will trigger the camera once the microphone detects any sound, such as the snapping of fingers, clapping hands or voice from human/ wildlife within approximately 2 metres.
Lightning response time | Approximately 0.1ms |
Motion detection range | Maximum 5 meters |
Motion detection area | Horizontal: 94°, Vertical: 82°, 64 zones |
IR temperature detection | ±4° C |
Sound detection volume | Above -38dB |
Sound detection range | 2 meters outdoor/ 3.5 meters indoor |
Power | 2X AAA battery(not included) |
Compatibility | EOS 20D, EOS Digital Rebel, Digital Rebel Xsi, EOS Digital Rebel Xsi, Eos Elan 7NE, Power Shot 7NE, Power Shot G10, G11, G12 |
Rebel T1, T2, T3, T3i, T4i | |
60D, ElanIIe | |
1DX, D30, D2000, DCS 520, EOS 10D, 1D, 1D Mark II,1D Mark IV EOS 1Ds, 1Ds Mark IIIEOS 1V/HS, EOS 3, 30D, 40D, 50D, 5D, 5D MarkII, 5D Mark III, EOS 7D, D60 | |
Dimension | 9.5×5.5×2.0cm |
Weight | 53.7 g |
This product comes with 12 Months Australian Manufacturer Warranty. Our products are sourced from authorised Australian suppliers and therefore come with genuine Australian warranty. Camera Warehouse does not participate in 'Grey Market' or 'Parallel Import' activities.
Micnova Trigger for Canon Light / Motion and Sound

SKU: Micnova MQVTC
UPC: 4897040884303