- BONUS: SanDisk Extreme Micro SDHC/SDXC UHS-I Card for Action Cameras (64 GB)
- PLUS - BONUS EXTRA DJI Phantom 4 Pro Battery (only for a limited time)
- 20 megapixel, 1" Image Sensor
- 2.4 GHz frequency
- 7km maximum transmission range
- 4K video recording at 60 fps
- Five directions of obstacle sensors
- 30 minutes maximum flight time
- Remote controller with built-in screen
- Draw control technology
- Activetrack function
- TapFly capability
- Gesture mode
- Sensor redundancy
- Compatible with the DJI GO app
- Genuine 12 Months Australian Warranty
Capture great perspectives from stunning angles with the DJI Phantom 4 Pro Plus Drone. An upgrade from the Phantom 4 Pro, it sports a 20 megapixel, 1" Image Sensor that enables 4K video recording at 60 fps. Signal delays are reduced by its 2.4 GHz frequency while its 7km maximum transmission range allows you to be creative with the available scenery during its 30 minutes maximum flight time. Any barrier that can impede its smooth flight is detected by five directions of obstacle sensors. Meanwhile, it provides accurate location details through its sensor redundancy function. The DJI Phantom 4 Pro is bundled with a remote controller with built-in screen that expands the drone camera's functionality through draw control technology and TapFly capability. On the other hand, you can follow your subject with ease by enabling the ActiveTrack function. Hands-free operation is also possible through Gesture mode. For access to more camera controls, the DJI Phantom Pro 4 Plus Drone is also compatible with the DJI GO app.
Product Features in Detail
20-megapixel CMOS sensor
Sensor size is more important to image quality than the number of pixels because a larger sensor captures more information in every pixel, improving dynamic range, signal-to-noise ratio, and low light performance. The 1-inch 20-megapixel CMOS sensor in the Phantom 4 Pro Plus is almost four times the size of the Phantom 4's 1/2.3in sensor. It uses larger pixels and has a maximum ISO of 12800 as well as increased contrast. It is good enough for images to be used immediately, while also capturing enough detail for advanced post-processing.
Enhanced video processing system
An enhanced video processing system allows video to be captured in cinema and production optimized DCI 4K/60 (4096 x 2160/60fps) at a bitrate of 100Mbps, enabling you to get high-resolution slow motion shots. The Phantom 4 Pro also supports the H.265 video codec (Maximum resolution 4096X2160/30fps). For a given bitrate, H.265 doubles the amount of image processing as H.264, resulting in significantly enhanced image quality. Record in the high dynamic range D-log mode to make the most of this image data for color grading.
High Resolution Lens
The resolution and contrast of a lens is critical to image quality, because only a quality lens can capture sharp, vivid photos at high resolutions. The brand new Phantom 4 Pro Plus camera has an aerial optimized F2.8 wide-angle lens with a 24mm equivalent focal length. It features eight elements – 2 aspherical – arranged in seven groups that fit into a smaller, more compact frame. Its images are consistently detailed with low distortion and low dispersion, ensuring that photos and videos are sharp and vivid. For the first time ever with a DJI camera, MTF (Modulation Transfer Function) results for this camera have been made public, so people can get a better understanding of lens performance.
Aerial imaging is not only used to capture landscapes; it brings new perspectives to everything from action scenes to motor racing. Capturing objects moving at high speed has always been a challenge for flying cameras using an electronic shutter. This is why the Phantom 4 Pro Plus is the first DJI Phantom to use a mechanical shutter and a large-aperture prime lens. Mechanical shutter with a max speed of 1/2000s eliminates rolling shutter distortion which can occur when taking images of fast moving subjects or when flying at high speed high speed. The electronic shutter has also been improved with a max shutter speed of 1/8000 seconds, and a new Burst Mode shoot capable of shooting 14 fps at 20 megapixels to catch the perfect moment.
Six-camera navigation system
Three sets of dual vision sensors form a six-camera navigation system that works constantly to calculate the relative speed and distance between the aircraft and an object. Using this network of forward, rearward and downward vison sensors, the Phantom 4 Pro Plus is able to hover precisely in places without GPS when taking off indoors, or on balconies, or even when flying through windows with minimal pilot control. In the unlikely event that front and downward sensors are unable to operate, the aircraft can still hover in place using the rear stereo vision system. The Phantom 4 Pro also is able to fly in complex environments at a flight speed of up to 31mph (50kph) while avoiding obstacles in its path. It will automatically adjust its obstacle detection method in line with its flight speed, allowing it to avoid obstacles at high and low speed.
FlightAutonomy is an advanced aerial intelligence and flight automation platform. It is made up of a complex network of ten component groups including seven cameras — forward, rearward and downward dual vision sensors and the primary camera — an infrared sensing system, dual-band satellite positioning (GPS and GLONASS), two downward facing ultrasonic rangefinders, redundant IMUs and compasses, and a group of powerful, specialized computing cores. The Phantom 4 Pro Plus acquires a real-time view of its environment and information about the height and position of nearby obstacles to create a 3D map it can locate itself within. The IMU and compasses collect crucial flight status, speed and direction data, while redundant IMUs and compasses monitor critical data and rule out possible errors, dramatically enhancing the reliability of flight.
The Phantom 4 Pro Plus is the first DJI aircraft to use an infrared sensing system. Placed on the left, and right sides of the aircraft, these measure the distance between the aircraft and any obstacles using infrared 3D scanning. When in Beginner Mode and Tripod Mode, these sensors have a horizontal field of view of 70° and a vertical field of view of 20°, providing a wide view of the scene to the sides of the Phantom, and a maximum range of 23ft (7m). Traditional ultrasonic sensors only have a detection range of 3-5m and may be confused when affected by propeller vibration or when sensing uneven surfaces. The infrared sensing system is able to sense larger areas and measure the distance between the aircraft, identifying the closest objects accurately while avoiding interference, providing more reliable sensing and protection.
The Phantom 4 Pro Plus controller integrates an upgraded Lightbridge HD video transmission system that adds 5.8 GHz transmission support. The ability to choose between 2.4Ghz and 5.8Ghz allows pilots to cut through interference and eliminates image lag caused when flying in an area with extensive 2.4Ghz frequency use. Normally, Wi-Fi video transmission systems use a 2.4GHz frequency to work with a controller using a 5.8GHz frequency as this prevents interference that can occur when both use the same frequency. To perform normally, the video transmission system and the controller will interfere with each other causing image lag, especially if both use the same frequency. The use of two different frequencies has drawbacks in terms of flight performance. For example, flight performance will be affected when either of the two frequencies suffer interference.
The Lightbridge HD video transmission system used in the Phantom 4 Pro Plus uses TDM (Time Division Multiplexing) to transmit signals, allowing it to send controller signals and receive video transmission signals at the same frequency. As the 2.4GHz frequency band is often affected by Wi-Fi, 4G cell towers, and other types of interference in urban areas, a 5.8Ghz band will increase transmission reliability. When switched on, the Phantom 4 Pro Plus evaluates local signal levels, automatically choosing the transmission frequency with the lowest level of interference. This ensures the optimum range of an unobstructed maximum video transmission of 7km (4.3mi).
Built-in remote controller screen
A 5.5in 1080p screen integrated with the Phantom 4 Pro Plus offers 1000 cd/m2 of brightness, more than twice as bright as conventional smart devices. It makes bright, vivid colors easily visible in direct sunlight. With this screen, a mobile device is not required, simplifying pre-flight preparations. As the DJI GO app is built into the screen, hardware and software can be fully optimized, further reducing video lag. Integration of an HDMI port, Micro-SD card slot, microphone, embedded loudspeaker, and Wi-Fi connection allow images to be edited inside DJI GO to be shared almost instantly. Lastly, a five-hour battery life makes the Phantom 4 Pro Plus a complete aerial imaging solution.
Draw is a brand new technology for waypoint control. Simply draw a route on screen and the Phantom 4 Pro Plus will move in that direction while keeping its altitude locked. This allows the pilot to focus on camera control and enables more complex shots. There are two Draw modes that can be used in different scenarios.
Standard: The aircraft follows the route at a constant speed with the camera facing in the direction of flight.
Free: The aircraft only moves along the route when instructed. In this mode, the camera can face in any direction during a flight.
The Phantom 4 Pro Plus automatically recognizes subjects, follows and captures them as they move, making it easier to get complex shots.
Following fast-moving objects can be very challenging, but advanced image recognition algorithms used by the Phantom 4 Pro allow it to recognize and track the object while keeping it in frame. This new algorithm also recognizes more subjects, from people to vehicles to animals, and will adjust its flight dynamics to match, ensuring smoother shots.
Pilots can now choose between:
Trace – Follow behind or in front of a subject, avoiding obstacles automatically.
Profile – Fly alongside a subject at a variety of angles to get profile shots of the subject.
Spotlight – Keep the camera trained on a subject while the aircraft flies almost anywhere.
Fly in any direction visible on-screen with a simple tap. Tap anywhere on-screen to smoothly adjust the direction of flight while automatically avoiding obstacles * and tap the screen again or use control sticks to change direction. A new AR route function shows the aircraft’s real-time flight direction for reference as its route is adjusted. As it can be difficult to control altitude, course, speed and camera pitch simultaneously using joysticks, TapFly Free allows a pilot to set the direction of flight, allowing them to turn the Phantom 4 Pro Plus or tilt the gimbal as required without changing the direction of flight. In total, there are now three TapFly modes:
TapFly Forward – Tap to fly in the selected direction
TapFly Backward – Tap to fly in the opposite direction of the tap, i.e. tap in the bottom right corner of the screen to fly backward towards the top left.
TapFly Free – Lock the forward direction of the Phantom without locking the camera direction allowing it to turn as it flies.
Return to Home
In its upgraded Return to Home mode, the Phantom 4 Pro Plus can automatically choose the best route to return home depending on environmental conditions. It records its route as it flies, allowing it to return along the same route avoiding obstacles if the control signal is disconnected.
Based on its altitude at the time of disconnection, the Phantom 4 Pro Plus is also able to adjust its flight path to avoid obstacles it has seen during its flight. At takeoff, the Phantom 4 Pro Plus will record the scene below and compare its recording with what it sees as it returns, for more precise landing. It can also detect the ground to see whether there is suitable spot for landing. If any obstacles are found, or there is water on the ground, it will alert the pilot and hover at an appropriate height, helping the aircraft to land more safely.
Using Gesture Mode, selfies can be captured easily using a few gestures without the remote controller. Advanced computer vision technology allows the Phantom 4 Pro Plus to take instructions through gestures. The subject simply lifts their arms when facing the camera and the aircraft will recognize this movement by locking on and placing the subject in the center of the frame. When ready for a photo, the subject holds their arms out to signal the aircraft. A three second countdown will begin, making time to strike a pose, allowing moments to be captured without the remote control.
Different productions require different flight characteristics, and the Phantom 4 Pro Plus offers three modes for flight: P, A and S. Switching between them allows pilots to get the control they need, whether they seek smoothness, simplicity, intelligent navigation or speed. In Position Mode, TapFly, ActiveTrack, obstacle sensing and positioning features are available. Sport Mode adds extra agility and higher speed, reaching 45mph (72kph). Atti Mode switches off satellite stabilization and holds the Phantom 4 Pro’s altitude. It is ideal for experienced pilots looking to capture smoother footage. Tripod Mode, which limits speed to 4mph (7kph) provides precision control for fine framing and indoor flying. Both the infrared sensing system and vision sensors are enabled in these modes for a safer flight experience.
Using brand new DJI Lightbridge HD video transmission technology, the Phantom 4 Pro Plus has an unobstructed maximum transmission range of 7km. Before each flight, it scans a range of available frequencies to find and use the one with the least interference. By supporting 2.4GHz and 5.8 GHz frequency bands, it gives you more reliable control. Tightly integrated with DJI GO, Lightbridge video transmission also sends vital flight statistics in real time, and can be used to quickly download photos and videos to connected mobile devices.
The Lightbridge video transmission system uses advanced transmission technologies and can automatically adjust to environmental conditions. It ensures high quality, low latency image transmission across its range and offers pilots a better shooting experience. Traditional analog video transmission occupies a larger bandwidth and is more susceptible to interference. It also suffers from poor image quality and short range. Wi-Fi transmission also compares poorly, suffering from low latency, lengthy re-connection times, and short transmission distances due to the high cost of more powerful Wi-Fi transmission.
The Phantom 4 Pro Plus features dual compass modules and dual IMU units, making it more reliable when compared to many hexacopters and octocopers. Compasses and IMUs are important sensors to ensure a stable flight and the Phantom 4 Pro Plus constantly compares the data it receives through both pairs. This data is run through advanced algorithms to check accuracy and any inaccurate data is simply discarded without affecting flight, keeping flight steady and reliable.
Professional aerial imaging benefits from longer flight times. The Phantom 4 Pro Plus has a maximum flight time of 30 minutes, providing more time in the air to capture the perfect shot. The DJI GO app shows battery lifetime and calculates remaining flight times according to distance traveled and more. It will give alerts when it reaches a minimum safe amount required for a safe journey back to the takeoff point. An advanced battery management system is also in place to prevent overcharging and over draining. When placed in longer term storage, batteries will discharge power to maintain good health.
When shooting aerials, the remote controller is responsible for most physical controls including piloting and capture. However, more challenging shoots require a real-time video feed, vital flight statistics and advanced settings. These are traditionally handled through a smart device, making the smart device essential to aerial imaging. The DJI GO app is optimized for aerials and is updated along with the aircraft to ensure all features are supported. It can be used on smart devices and is available to be integrated into the DJI Crystalsky monitor, providing simple and convenient control.
Using the DJI GO app, a large number of Intelligent Fight Modes are available. It also provides access to full manual camera controls, including ISO, aperture, shutter speed, image formats, and more. Any changes in DJI GO will appear almost instantly on-screen. Vital flight data and video transmission status are easy to check in-app, further enhancing control efficiency and convenience.
DJI GO includes editing features for quick editing and sharing to social media and even live streaming. After each flight, flight routes and data are automatically recorded and synchronized to the attached DJI GO account, keeping it readily accessible for you to review. Both flight logs and data are easy to record and review.
Included in the Box
DJI Phantom 4 Pro Plus Drone
DJI Phantom 4 Pro Plus Remote Controller
4 x Propellers
Intelligent Flight Battery
AC Cable for Battery Charger
USB OTG Cable
Micro USB Cable
12 Months Genuine Australian Warranty
This DJI Phantom 4 Pro Plus Drone comes with 12 Months Genuine Australian Warranty.
Our products are sourced from authorised Australian suppliers and therefore come with genuine Australian warranty.
Camera Warehouse does not participate in 'Grey Market' or 'Parallel Import' activities.
Aircraft Weight (With Battery & Propellers) 1388 g Diagonal Size (Propellers Excluded) 350 mm Max Ascent Speed S-mode: 6 m/s; P-mode: 5 m/s Max Descent Speed S-mode: 4 m/s; P-mode: 3 m/s Max Speed 45 mph (72 kph) (S-mode); 36 mph (58 kph) (A-mode); 31 mph (50 kph) (P-mode) Max Tilt Angle 42° (S-mode); 35° (A-mode); 25° (P-mode) Max Angular Speed 250°/s (S-mode); 150°/s (A-mode) Max Service Ceiling Above Sea Level 19685 ft (6000 m) Max Flight Time Approx. 30 minutes Operating Temperature 32° to 104° F ( 0° to 40° C) Satellite Positioning Systems GPS/GLONASS GPS Hover Accuracy Range Vertical: ±0.1 m (With Vision Positioning); ±0.5 m (With GPS Positioning)
Horizontal: ±0.3 m (With Vision Positioning); ±1.5 m (With GPS Positioning)
Vision System Velocity Range ≤31 mph (50 kph) at 6.6 ft (2 m) above ground Altitude Range 0 – 33 ft (0 – 10 m) Operating Range 0 – 33 ft (0 – 10 m) Obstacle Sensory Range 2 – 98 ft (0.7 – 30 m) FOV ±60°(Horizontal), ±54°(Vertical) Detection Frequency 10Hz Operating Environment Surfaces with clear patterns and adequate lighting (> 15 lux) Camera Sensor 1’’ CMOS; Effective pixels: 20M Lens FOV (Field of View) 84°, 8.8 mm / 24 mm (35 mm format equivalent),
f/2.8 - f/11.
auto focus at 1 m - ∞
ISO Range Video: 100 - 3200 (Auto); 100 - 6400 (Manual)
Photo: 100 - 3200 (Auto); 100- 12800 (Manual)
Mechanical Shutter 8 - 1/2000 s Electronic Shutter 8 - 1/8000 s Max Image Size 3:2 Aspect Ratio: 5472 × 3648
4:3 Aspect Ratio: 4864 × 3648
16:9 Aspect Ratio: 5472 × 3078
PIV Image Size 16:9 Aspect Ratio:
・5248 × 2952（3840 × 2160 24/25/30p，2720 × 1530
1920 × 1080 24/25/30p, 1280 × 720 24/25/30p）
・3840 × 2160（3840 × 2160 48/50p，2720 × 1530 48/50p，
1920 × 1080 48/50/60p，1280 × 720 48/50/60p)
1920 × 1080 24/25/30p, 1280 × 720 24/25/30p）
・3840 × 2160（3840 × 2160 48/50p，2720 × 1530 48/50p，
1920 × 1080 48/50/60p，1280 × 720 48/50/60p
17:9 Aspect Ratio:
・4896 × 2592 (4096 × 2160 24/25/30p)
・4096 × 2160 (4096 × 2160 48/50p)
Still Photography Modes Single Shot Burst Shooting: 3/5/7/10/14 frames Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7EV Bias Interval: 2/3/5/7/10/15/30/60 s Video Recording Modes H.265
・C4K：4096×2160 24/25/30p @100Mbps
・4K：3840×2160 24/25/30p @100Mbps
・2.7K：2720×1530 24/25/30p @65Mbps
2720×1530 48/50/60p @80Mbps
・FHD：1920×1080 24/25/30p @50Mbps
1920×1080 48/50/60p @65Mbps
1280×720 48/50/60p @35Mbps
・C4K：4096×2160 24/25/30/48/50/60p @100Mbps
・4K：3840×2160 24/25/30/48/50/60p @100Mbps
・2.7K：2720×1530 24/25/30p @80Mbps
2720×1530 48/50/60p @100Mbps
・FHD：1920×1080 24/25/30p @60Mbps
1920×1080 48/50/60/120p @80Mbps
・HD： 1280×720 24/25/30p @30Mbps
1280×720 48/50/60/120p @45Mbps
Video Storage Bitrate 100 Mbps Supported File Systems FAT32 (≤ 32 GB); exFAT (> 32 GB) Photo JPEG, DNG (RAW), JPEG + RAW Video MP4/MOV (AVC/H.264；HEVC/H.265) Supported SD Cards Micro SD, Max Capacity: 128GB.
Write speed ≥15MB/s, class 10 or UHS-1 rating required
Operating Temperature 32° to 104° F (0° to 40° C) Gimbal Stabilization 3-axis (pitch, roll, yaw) Controllable Range Pitch: -90° to +30° Max Controllable Angular Speed Pitch: 90°/s Angular Control Accuracy ±0.03° TOF Sensing System Obstacle Sensory Range 0.6 – 23 ft (0.2 – 7 m) FOV ±35° (Horizontal), ±10° (Vertical) Detection Frequency 10 Hz Operating Environment Surface with diffuse reflection material,
and reflectivity > 8% (such as wall, trees, humans, etc.)
Remote Controller Operating Frequency 2.400 - 2.483 GHz and 5.725 - 5.850 GHz Max Transmission Distance FCC Compliant: 4.3mi (7km);
CE Compliant: 2.2mi (3.5km) (Unobstructed, free of interference)
Operating Temperature 32° to 104° F (0° to 40° C) Battery 6000mAh LiPo 2S Transmitter Power (EIRP) 2.400 GHz - 2.483 GHz
FCC: 23 dBm; CE: 17 dBm
5.725 GHz - 5.850 GHz
FCC: 30 dBm; CE: 14 dBm
Operating Voltage 1.2 A @7.4 V Video Output Port GL300E: USB
Mobile Device Holder GL300E: Tablets and smart phones
GL300F: Built-in display device (5.5 inch screen, 1920×1080,
1000 cd/m2, Android system, 4G RAM＋16G ROM)
Intelligent Flight Battery (PH4-5870MAH-15.2V) Capacity 5870 mAh Voltage 15.2 V Battery Type LiPo 4S Energy 89.2 Wh Net Weight 468 g Charging Temperature Range 14° to 104° F (-10° to 40° C) Max Charging Power 100 W Charger Voltage 17.4 V Rated Power 100 W
- User Reviews
DJI Phantom 4 Pro+ Drone
Regular Price: $2,748.00
Special Price $2,598.00