Cokin Filter Holder for M (P) Series Filters

This lightweight filter holder is designed to hold up to 3 square or rectangular filters, with each filter measuring 84mm wide. The Cokin Filter Holder is crafted with a light-weight design, allowing for easy handling and minimizing the additional weight on your camera setup.

This filter holder has the capacity to hold up to 3 square or rectangular filters simultaneously. This gives you the flexibility to use different filters to achieve your desired creative effects or control the light entering your camera. It is specifically designed to hold M (P) Series filters, which have a width of 84mm. These filters are known for their versatility and high-quality optical performance.

In order to attach the Cokin Filter Holder to your lens, you will need to use a lens adapter ring. These adapter rings are compatible with different lens diameters and are available separately. The adapter ring allows for secure and precise attachment of the filter holder to your lens.

The Cokin Filter Holder for M (P) Series Filters offers a lightweight and versatile solution for using filters with your camera. With its ability to hold up to 3 filters and compatibility with 84mm wide filters, you can easily experiment with different creative effects, control light, and enhance your photography. Please note that a lens adapter ring is required to attach the filter holder to your lens, and it can be obtained separately based on your specific lens diameter.

Product Features in Detail

Cokin Filter Holder for M (P) Series Filters
The Cokin BP400A P-series holder allows photographers to attach up to 3 square or rectangular filters depending on the creative effect they are trying to achieve. For example, it is common for photographers to use a straight neutral density filter like a 3-stop to control the motion blur of a waterfall then combine it with a 2-stop Graduated Neutral Density to control the detail in the sky. The end result is a beautifully captured single exposure.

Cokin also manufactures a round Circular Polarizer (P164) that is specifically designed for the P-series holder. Cokin created a special slot on the holder closest to the lens that accepts the outside edge of the round filter. The slot allows you to insert the filter and then rotate it to achieve the desired polarizing effect. With this filter attached you are able to add one more additional filter to the front slot of the holder.

The P-series holder will work with Full-Frame lens focal lengths 24mm and greater. If you use the holder on a lens that is wider than 24mm there is a very good chance that you will see the holder in the corners of your pictures, This is also called a vignette or vignetting. It is also possible that you will experience vignetting even at 24mm if the holder is rotated off center axis. We recommend you look at Cokin’s larger filter systems, the Cokin Z-pro or X-pro, if you plan to use lenses wider than 24mm.

The P-series holder also requires an adapter ring, purchased separately, that will allow you to attach the holder to your lens. It will screw onto the front of your lens just like a regular camera filter does. The adapter rings are available in different sizes from 49mm to 82mm, To determine which adapter ring(s) you need simply remove your lens cap from your lens and turn it over. 98% of the time there will be a number on the backside of the cap. That is your filter size. If that does not work you can go to the original lens manufacture's website or instruction manual specifications section and you will find your lenses filter size there.

It is highly recommended that you remove any other filters from the lens before mounting the adapter ring and holder. Additional filters will increase the chance of vignetting especially on wide angle lenses.