- Home /
- CamRanger PT Hub and MP-360
The CamRanger PT Hub and MP-360 is works by the connecting to CamRanger to remotely control the DSLR with unlimited panning capability. It can also tilt up to 30° (15° up and 15° down). The PT-Hub runs via the CamRanger battery. The bubble level helps to make sure that the devices are in an even terrain. The MP-360 operates on 4 AA batteries or AC power. It attaches to a tripod with ¼”-20 screw and be controlled through a Power Panner Remote Control.
Product Features in Detail
Operates with CamRanger
The CamRanger PT Hub and MP-360 includes the cables required to connect the tripod head with the CamRanger. It is noted that the CamRanger PT Hub and MP-360 require the CamRanger to operate.
The CamRanger PT Hub is compatible with the MP-360 (or MP-101, Bescor, or Hague tripod head) and the StackShot.
Includes the two cables
The CamRanger PT Hub includes the two cables required to connect the CamRanger with the MP-360 or StackShot (when ordering select the proper application to receive the respective cables).
Means of use
It is noted in order to use the CamRanger PT Hub, a CamRanger and MP-360 (or MP-101, Bescor, or Hague tripod head)/StackShot must be used. It is also noted that the MP-360 and StackShot cannot be used simultaneously with the CamRanger PT Hub.
Included in the Box
CamRanger PT Hub and MP-360
18" CamRanger Custom Cable
12" USB 2.0 Cable
Power Panner Remote
6 months limited warranty from Kayell Australia
This CamRanger PT Hub and MP-360 comes with 6 months limited warranty from Kayell Australia
Our products are sourced from authorised Australian suppliers and therefore come with genuine Australian warranty.
Camera Warehouse does not participate in 'Grey Market' or 'Parallel Import' activities.
|Operation||4 AA batteries or AC power|
|Tilt||15° up and 15° down|
|Weight Limit||6 pounds|
|Dimensions||5.75 x 4.50 x 4.00" (146 x 114 x 102 mm)|
|Weight||MP-360: 1.7 lb / 770 g (without batteries) 2 lb / 907 g (with batteries)|
|PT Hub: 1.4 oz (39 g)|