Benro MoveOver8 18mm Slider (90cm Length)

The Benro MoveOver8 18mm Slider (90cm Length) is a heavy-duty, professional linear tracking system designed to deliver buttery-smooth cinematic camera movements. Engineered with large-diameter carbon fiber rails, this slider effortlessly supports fully rigged cinema cameras, heavy DSLRs, and mirrorless setups weighing up to 17.6 pounds.

Designed for absolute versatility on location or in the studio, the slider can operate completely flat on the ground via its articulating all-terrain legs, mounted centrally onto a heavy-duty video tripod, or suspended between two standard light stands. The carriage features a standard flat mounting surface, allowing you to easily attach any flat-base fluid head for complex pan, tilt, and slide maneuvers.

Product Features in Detail

18mm Carbon Fiber Rail System
Utilizing thick, 18mm diameter carbon fiber tubes, the track provides an incredibly rigid, warp-free runway for heavy payloads. This advanced carbon composite eliminates the structural bowing commonly found in aluminum sliders, ensuring your tracking shots remain perfectly level from end to end.

Pre-Tensioned Bearing Carriage
The heavy-duty aluminum carriage glides on a specialized set of pre-tensioned roller bearings. This setup guarantees a frictionless, silent glide right out of the box. A built-in friction knob allows the operator to manually dial in drag for controlled, slow-motion pushes, or lock the carriage completely as a static brake.

All-Terrain Articulating Legs
Outfitted with structural rosette joints, each of the four legs can rotate a full 360 degrees to navigate rocks, stairs, or uneven ground. For micro-adjustments, each foot offers approximately 4 inches of independent height tuning, supplemented by a built-in bubble level on the track for perfect horizontal alignment.

Multi-Platform Stand Mounting
The extreme ends of the track blocks are engineered with integrated Baby pin slots, allowing you to quickly drop the slider directly onto standard heavy-duty light stands or C-stands. Each end block also features extra 1/4"-20 and 3/8"-16 threads for custom rigging.

Central Tripod Cheese Plate
For single-stand operation, the center of the slider rails features a dedicated, heavy-duty cheese plate. Equipped with reinforced 3/8"-16 and 1/4"-20 threaded mounting holes, it can be securely anchored directly to a primary video tripod.

Carriage Accessory Expansion
To keep your camera's hot shoe clear, the aluminum slider carriage incorporates four independent 1/4"-20 threaded mounting holes. This allows you to attach articulating magic arms directly to the moving platform to hold field monitors, wireless transmitters, or microphones.

Extreme Angle & Underslung Operation
The slider's robust bearing grip allows it to operate flawlessly at any incline from 0 to 90 degrees for vertical rising shots. Furthermore, the carriage can be completely inverted, allowing you to undersling your camera for extreme low-angle floor tracking.