Benro AD73T Dual Stage Tripod with BV4 Head - 75mm Bowl
- Maximum Load of 4kg
- Maximum Height of 164.5cm
- Minimum Height of 77.8cm
- Folded Length of 84.2cm
- 75mm Head
- 2-Stage Twin Leg Aluminum Tripod
- Flat Base By Removing Tiedown Stud
- 6-Step Counterbalance (Steps 0-5)
- Independent 4-Step Pan and Tilt Drag
- 501/504PL/Ace Compatible Type Sliding Plate
- Mid-Level Spreader
- Spike Feet & Removable Rubber Foot Pads
- 5 Years Genuine Australian Manufacturers Warranty
Made for photographers on the go, the Benro AD73T incorporates a lightweight 2-stage twin leg aluminum tripod with 75mm bowl, mid-level spreader, quick positive leg locks, retractable spiked feet & removable rubber foot pads to effortlessly assemble whenever and wherever the situation is. Controlling the head is also just as easy thanks to the 75mm head with independent 4-step pan and tilt drag and 501/504PL/Ace compatible type sliding plate. The tripod’s added versatility is provided by converting the BV4 head to a flat base by removing the tiedown stud. This tripod kit can reach up to a maximum height of 164.5cm to a minimum of 77.8cm enough to carry a maximum load of 4kg. In case of transport, the tripod can be folded down to a length of 84.2cm.
Product Features in Detail
6-Step counterbalance
The 6-step counterbalance (steps 0–5) allows you to dial in the right amount of counterbalance for each setup, great when changing lenses or adding accessories.
Each step provides a different amount of counterbalance. The 0 settings makes convenient camera balancing during set-up.
The BV4 will balance loads up to 8.8 lb/4kg.
Sliding Quick Release Plate
The 501/504PL/Ace compatible sliding quick release plate makes it easy to set the balance point of your camera gear, quickly and precisely.
Convenient Features
The heads incorporate a 3/8-inch accessory mount, perfect for mounting a simple audio recorder or monitor. For added versatility, the tie down stud is removable to convert the BV 10 or BV8 head to flat base mode for mounting to a slider.
Floor spreader
Built-in extra stability
Double spike feet with removable rubber pads, and twist leg locks
The tripod height can easily be set by a twist of the quick lock leg levers levers which, combined with the anti-rotation legs, enable fast and fumble free set-up.
Independent pan and tilt drag
The BV6 has a 4-step pan and 4-step tilt drag for independent control over each movement, to ensure your movements are smooth and steady. The 4-step pan & tilt drag controls offer a more professional style setup and repeatable movements.
Independent Locks
Both the pan lock and the tilt lock can be turned on or off independently and are located on the operator side of the head for easy control. Tilt range for the BV10 is +90°/-65° and the BV 8 is +90°/-70°
Carrying Case Included
Heavy Duty Case with backpack straps included for handy transport and protection of the tripod and head
Benro AD73T Dual Stage Tripod with BV4 Head
Warranty Information
Our products are sourced from authorised Australian suppliers and therefore come with genuine Australian warranty.
Camera Warehouse does not participate in 'Grey Market' or 'Parallel Import' activities.
| MAXIMUM LOAD | 8.82 lb (4 kg) |
| MAX HEIGHT (24° LEG ANGLE) W/COLUMN EXTENDED | 64.8 in (164.5 cm) |
| MINIMUM HEIGHT | 30.63 in (77.8 cm) |
| MAXIMUM HEIGHT | 64.8 in (164.5 cm) |
| FOLDED LENGTH | 33.1 in (84.2 cm) |
| NUMBER OF LEG SECTIONS | 5 |
| LEG LOCK TYPE | Twist Lever Lock |
| INDEPENDENT LEG SPREAD | ML08 Mid-Level Spreader |
| TILT RANGE | +90 / -75 (Stepped 0-5 Fluid Cartridge Balance) |
| QUICK RELEASE (QR) PLATE | Slide-in Video (QR10) 1/4-20 & 3/8 |
| HEAD MOUNT THREAD SIZE | 75mm Bowl |
| WEIGHT | 10.14 lb (4.6 kg) |
