The RØDE VideoMic is a professional grade shotgun microphone. Based on the latest 'Film industry' technology, the VideoMic is designed specifically for use with studio recording quality Digital Video Cameras. The super cardioid polar pattern mic is built in a rugged reinforced ABS construction with Integrated Rycote® Lyre® shock mounting to isolate the mic from bumps and vibrations. It features three step PAD (0, =10, -20dB), two step High Pass Filter (Flat/80Hz), 3.5mm mini-jack output, and 9V battery power. This shotgun microphone also has an integrated cold-shoe mount (3/8” thread) for easy boom pole or stand mounting.

Product Features in Detail

Professional grade 1/2" condenser shotgun microphone
The RØDE VideoMic is a professional grade 1/2" condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders.

Integrated Rycote® Lyre®
The integrated Rycote® Lyre® based shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

Standard sized shoe mount
Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand.

Super-cardioid polar pattern
By employing a super-cardioid polar pattern the VideoMic becomes highly directional, focusing on the subject in front of the camera, and minimising any surrounding sounds.

High-pass filter at 80Hz
In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

-10dB and -20dB level attenuation (or PAD)
A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport.

Designed and made in Australia
The RØDE Video Microphone is designed and made in Australia.

Specification

Acoustic Principle	Line Gradient
Active Electronics	JFET impedance converter
Capsule	0.50"
Polar Pattern	Cardioid
Address Type	End
Frequency Range	40Hz - 20kHz (selected HPF @ 0)
Output Impedance	200Ω
Maximum SPL	134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity	-38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)	20dB-A
Power Options	9V Battery
Weight	176.00gm
Dimensions	65.00mmH x 102.00mmW x 250.00mmD
Output	Minijack Output

Warranty

This product comes with 24 months Australian Warranty. Our products are sourced from authorised Australian suppliers and therefore come with genuine Australian warranty. Camera Warehouse does not participate in 'Grey Market' or 'Parallel Import' activities.

In The Box

RODE Video Microphone

Reviews

Rode VideoMIc Microphone