Rode NT2000 Microphone
- Large 1” HF1 gold sputtered capsule
- Continuously variable PAD and High-Pass Filter
- Continuously variable polar pattern, from Omni to Cardioid to Figure 8 controlled on the mic
- Wide dynamic range
- Ultra low noise, transformerless surface mount circuitry
- Internal capsule shock mounting
- High strength welded and heat treated steel mesh head
- Extremely low self-noise (7 dBA)
Product Features in Detail
Studio-quality large diaphragm condenser
The RØDE NT2000 microphone is a studio-quality large diaphragm condenser with seamlessly variable polar patterns. Its polar patterns selection, filter and pad are conveniently located on the front of the microphone body for ease of use.
Extremely low self-noise (7dBA)
Audiophile quality surface-mount electronics combined with a gold-sputtered dual 1" capsule provide extremely low self-noise (7dBA) and a maximum SPL of 147 dB (up to 157 dB with pad fully engaged) giving an incredible amount of versatility and ensuring exceptional results.
Designed and made in Australia
The RØDE NT1000 large diaphragm 1" cardioid microphone is designed and made in Australia.
Studio grade pop shield and shock mount
A studio grade pop shield and shock mount is included, along with a premium 20' microphone cable, dust cover, and an instructional DVD packed with recording tips.
Acoustic Principle | Pressure Gradient |
Active Electronics | JFET impedance converter with bipolar output buffer |
Capsule | 1.00" |
Polar Pattern | CardioidFigure 8 - picks up from the front and rear and rejects sidesOmnidirectional - picks up all sides equally |
Address Type | Side |
Frequency Range | 20Hz - 20kHz |
Output Impedance | 200Ω |
Maximum SPL | 147dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
Maximum Output Level | 15.0dBu (@ 1kHz, 1% THD into 1KΩ load) |
Sensitivity | -36.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
Equivalent Noise Level (A-weighted) | 7dB-A |
Power Options | +24V phantom power+48V phantom power |
Weight | 831.00gm |
Dimensions | 208.00mmH x 55.00mmW x 55.00mmD |
Output | XLR Output |
Rode NT2000 Microphone
Rode SM2 Elastic Suspension Microphone Shock Mount
Rode RC1 Hard Plastic Case - for Rode NT2000 Seamlessly Variable Dual 1" Condenser Microphone

SKU: Rode NT2000 Microphone
UPC: 698813000029