Peak Design Anchor Mount PL-AN-1
- Lightweight Design
- Works with all Peak Design Straps
- Screws into Standard 1/4-20 Socket
- Use on 11mm Standard Camera and Wrist Straps
- Anodized Aluminum Construction
- Lifetime Warranty from Peak Design
The slim and lightweight designed Anchor Mount from Peak Design works with all Peak Design Straps and can be used on 11mm Standard Camera and Wrist Straps. It screws into standard 1/4-20 socket of the camera’s tripod socket. The Anchor Mount is designed with Anodized Aluminum Construction.
Product Features in Detail
1 On the Side, 1 On the Bottom
We often recommend attaching 1 end of your PD strap to your camera's side strap lug (opposite the grip) and the other end to the bottom. These 2 connection points let the camera hang with the lens facing down for greater comfort and stability, especially with longer primes and zooms. Anchor Mount is the most low-profile, unobtrusive connection point available for PD Anchors and standard camera straps.
Attach PD Anchors to increase your carry options with any of our straps. Compatible with all versions of our Anchors and straps.
Works with OEM Straps
Attach any standard camera neck strap or wrist strap. Works with strap ends up to 11mm wide.
Twist Resistant
Ultra-secure 4mm hex drive with anti-twist pad.
Fits Any Camera
Screws into any standard 1/4""-20 tripod socket.
Rugged, weatherproof machined/anodized aluminum construction.
Note: Anchor Mount is not compatible with tripods or Capture system. If you frequently use a tripod or Capture, check out our Standard Plate.
SKU/PART NUMBER: | PL-AN-1 |
WRIST LOOP SIZE | Diameter when open: 9.7 cm (3.82 in), but easily fits hands 5+ inches wide diameter when cinched: 4.5 cm (1.75 in) |
STRAP WIDTH | 19 mm (0.75 in) |
MATERIALS: | Anodized aluminum plate with hard rubber anti-twist pad, turned/machined stainless steel hex-drive screw |
WEIGHT | Unpackaged: 18 g (.71 oz) |
Packaged: 36 g (1.3 oz) | |
SIZE | Length: 30 mm (1.2 in) |
Width: 20 mm (.79 in) | |
Height (protrusion from camera): 5 mm (.20 in) | |
STRAP LOOP SIZE | Fits straps up to 13mm (.51 in) wide |
STRENGTH RATING | Can withstand well over 200 lbs (90 kg), making Anchor Mount safe for use with the largest of professional cameras. |
Peak Design Anchor Mount
4mm Hex Key
Limited Lifetime Warranty with Peak Design
SKU: Peak Design PD-PL-AN-1
UPC: 818373020101