Leofoto LH-40 40mm Low Profile Ball Head
- Load Capacity: 44.1 lbs
- Height: 2.7 inches
- Weight: 18.2 oz
- Arca-Type Compatible
- 360° Pan with Independent Pan Lock
- Double Notch at Base for Tilting 90°
- Friction Control Knob
- Bubble Level & Distance Markings at Top
The LH-40 Low Profile Ball Head from Leofoto is designed with a fixed height of 2.7 inches and has a large ball diameter of 1.6 inches. The low profile design allows the ball head to carry equipment as heavy as 44.1 lbs, keeping it safe when shooting with your camera
Plus, the LH-40 has a large knob on the right side that can be used to pan 360°, notches for 90° tilt in two directions at the base of the ball head and independent locking knobs to fine tune your composition. It weighs 18.3 oz and is made from anodized aluminum with tripod mounting holes.
Product Features in Detail
Arca-Type Compatible
The LH-40 Low Profile Ball Head is compatible with all Arca-Type release plates
360° Panning and Tilt Angle of 90°
Your LH-40 Low Profile Ball Head can achieve 360-degree panning. If you need upward or downward looking shots, you can change its tilt angle by 90 degrees
Three-Knob Position Adjustment
You can control your LH-40's panning movement and tension control with its effective three-knob position adjustment
| Load Capacity | 44.1 lb / 20 kg |
| Ball Sphere Diameter | 1.6" / 4 cm |
| Base Diameter | 2.2" / 5.7 cm |
| Quick Release | Yes |
| Spirit Level | Yes |
| Pan Range | 360° |
| Maximum Tilt | 90° |
| Tension Control | Yes |
| Separate Panning Lock | Yes |
| Tripod Mount Thread Size | 3/8"-16 |
| Height | 2.7" / 6.9 cm |
| Weight | 18.3 oz / 520 g |
This product comes with 12 Months Australian Manufacturer Warranty. Our products are sourced from authorised Australian suppliers and therefore come with genuine Australian warranty. Camera Warehouse does not participate in 'Grey Market' or 'Parallel Import' activities.
Leofoto LH-40 Low Profile Ball Head with Quick Release Plate, Quick Release Plate
