- Home /
- Rode Stereo VideoMic Pro Microphone
Stereo VideoMic Pro Microphone is a broadcast recording quality on-camera microphone with integrated shock mount, two step High Pass Filter (flat, 75Hz) and three position level control (-10dB, 0, +20dB). It is designed to connect directly to consumer video cameras and DSLRs. It features on mic power and EQ controls with matched pair 1⁄2” condenser capsules in XY stereo configuration providing wide stereo image with natural depth. Loudness is possible in three position level control via (-10dB, 0, +20dB). The mic can be connected to the camera slot via 3.5mm stereo mini-jack output and 9V battery powered - over 100 hours use (alkaline). Its ultra lightweight, compact form factor is built with billeted metal camera shoe mount with 3/8” thread and integrated foam windscreen to minimize low end noise.
Product Features in Detail
High quality stereo option
Building on the success of the VideoMic Pro, the defacto standard for DSLR on-camera audio, and RØDE’s original Stereo VideoMic, the new Stereo VideoMic Pro provides a high quality stereo option for videographers, and is ideal for recording music, and the atmospheric ambience essential in building a realistic audio scene.
½”cardioid condenser capsules
Based around a matched pair of high sensitivity ½”cardioid condenser capsules in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth.
Ergonomic form factor
The Stereo VideoMic Pro builds on the feature set of the VideoMic Pro, with an ergonomic form factor perfectly suited to DSLR, consumer camcorders and large-sensor video cameras. The integrated shock mounting system provides superior isolation from vibration and mechanical noise that can otherwise degrade the recording quality. Additionally the lightweight yet robust multi-strand cable provides excellent acoustic decoupling from the camera and offers significantly lower noise transference than traditional audio cable.
High pass filter at 75Hz
The user friendly designed rear of the microphone body features the power and equalisation controls, including a high pass filter at 75Hz which is designed to cut out the noise generated by air conditioning, traffic and other undesirable low frequency interference.
A -10dB PAD allows the user to reduce the sensitivity of the microphone, making it suitable for recording loud sound sources such as live music or at sporting events.
+20dB level boost
Like the VideoMic Pro, the Stereo VideoMic Pro features a +20dB level boost specifically designed to provide a higher quality signal with DSLR cameras. When activated, the typically low quality camera preamp level can be reduced, resulting in a lower noise floor and much clearer recording.
|Acoustic Principle||Pressure Gradient|
|Active Electronics||JFET impedance converter|
|Polar Pattern||CardioidPaired cardioid capsules in X-Y stereo pattern|
|Frequency Range||40Hz - 20kHz|
|Maximum SPL||134dB SPL (@ 1kHz, 1% THD into 1KΩ load)|
|Sensitivity||-38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz|
|Equivalent Noise Level (A-weighted)||20dB-A|
|Power Options||9V Battery|
|Dimensions||130.00mmH x 66.00mmW x 108.00mmD|
This RODE Stereo VideoMic Pro Microphone comes with 12 months Warranty plus extra 10 years when registered on RODE website.
Our products are sourced from authorised Australian suppliers and therefore come with genuine Australian warranty.
Camera Warehouse does not participate in 'Grey Market' or 'Parallel Import' activities.
RODE Stereo VideoMic Pro Microphone
12 months Warranty plus extra 10 years when registered on RODE website