- Home /
- Phottix Mitros+ and Odin TCU Combo for Canon
With the combination of Phottix Mitros+ and Odin TCU, you will be totally in control of your flash from the camera. The Mitros+ and Odin provide remote power control of groups in TTL with +/- EV adjustments (3 stops in 1/3 stop increments - 18 different levels through the built-in Phottix Odin Transmitter and Receiver, and Strato II receiver. It also has an AF Assist Light and Quick Flash Mode. This all in one flash integrates High Speed Sync and Second Curtain Sync and can be set as Optical Slave. Its external battery port and 3.5mm sync port allow you to connect the flash to a larger system. The Phottix Odin TTL Flash Trigger Transmitter for Canon can relay a wireless 2.4 GHz frequency for an optimum range of 100 metres. It is also capable of high speed sync of up to 1/8000 seconds in either Manual, TTL, or Ratio flash triggering modes.
Product Features in Detail
Phottix Mitros+ TTL Transceiver Flash
The Phottix Mitros+ TTL Transceiver Flash is the best of Phottix’s gold-standard products all-in-one.
What’s the + ?
+ Built-in Odin Transmitter
+ Built-in Odin Receiver
+ Built-in Strato Receiver
+ Memory Functions
The Phottix Mitros is a powerful and durable hot shoe flash that has proven popular since it’s release earlier this year. The Phottix Mitros+ adds significant functionality, allowing photographers to not only use the Mitros on or off camera for lighting, but to also control and trigger remote flash by radio signal. The Mitros+ is an industry landmark and was developed with input from wedding and event photographers.
Use the Mitros+ on-camera as a key or fill light, as well as control and trigger other Mitros+ flashes or compatible flashes using Phottix Odin Receivers. The Mitros+ also offers a built-in Phottix Odin Receiver and Strato II Receiver. Existing Phottix triggers, like the Phottix Odin or Strato II can be used to trigger the Mitros+ without extra receivers.
With the Phottix Odin’s functionality built-in the Mitros+ can be used to trigger Phottix Odin and Strato Receivers. Likewise: you can also trigger the Mitros+ using a Phottix Odin TCU or Strato II Multi Transmitter.
Using the Mitros+ in Odin Transmitter Mode provides the same functions found on the Phottix Odin, including:
Remote power control of groups in TTL with +/- EV adjustments (3 stops in 1/3 stop increments - 18 different levels)
Remote power control in Manual Mode: Full power to 1/128 in 1/3 stop increments.
Mix TTL and Manual flash – fire some groups in TTL, others as manual.
Remote power control in A:B ratio modes with +/- EV adjustments.
High speed sync – shutter speeds up to 1/8000 sec.
Second curtain sync functions.
Remote flash head zoom adjustments – auto or manual
The Mitros+ will control and trigger other Mitros+ flashes in receiver mode or Phottix Odin Receivers.
Like the Phottix Odin, the Mitros+ with a backlit LCD, is intuitive, and easy to use and understand.
The Mitros+ has a built-in Strato II Multi-compatible receiver. Existing Strato II Multi transmitter can trigger the Mitros+. The Mitros+ can also trigger Strato II Multi and Strato I Receivers when set in Odin Transmit Mode.
New with the Mitros+, built-in three location memory save and retrieval functions. Flash set up and custom function information can be saved in the Mitros+’s memory and be quickly recalled when needed. Use the Mitros+ in different modes for different situations? Quickly recall saved set-ups for fast use.
Phottix Odin TCU
What does the Odin offer?
The Phottix Odin TTL Trigger consists of an on-camera transmitter and control unit (TCU) and receiver units for compatible hot shoe flashes.
The Odin offers photographers four wireless channels and three flash control group designations. Flashes can be controlled in TTL ratio modes A:B with EV +/- adjustments of three stops.
What makes the Phottix Odin unique is the ability to designate groups in TTL/Mixed mode. Individual groups, A, B, C, can also be controlled in TTL mode with EV +/- adjustments. Groups can also be set to Manual mode, adjusting power levels remotely, or turned off.
Flash head zoom can be set to be dynamically adjusted as photographers adjust their lenses. Flash zoom can also be easily adjusted manually and set statically from 24 to 105 mm. The Phottix Odin system will also trigger compatible non-TTL flashes and studio strobes.
The four-channel, 2.4 GHz, transmitter and receiver units work at ranges of more than 100 meters and accept AA batteries.
Compatible with other Phottix Triggers
The Phottix Odin™ TTL Flash Trigger will trigger Phottix Strato 4-in1, Strato II Multi 5-in-1 and Atlas II triggers. Strato and Atlas II transmitter will not trigger Odin receivers. Because the world of cameras and flashes changes the Phottix Odin system can be upgraded when needed using the built-in USB ports.
Please note: Some third party TTL flashes may function with the Phottix Odin. Due to the vast number of third party alternatives Phottix will not test, support or troubleshoot third party flashes. For more detailed information please check the version specific information below.
Included in the Box
Phottix Mitros+ and Odin TCU Combo for Canon
Adapter for External Power Packs
3.5mm Sync Cable
2 x AA Batteries
12 Months Genuine Australian Warranty with Adeal
This Phottix Mitros+ and Odin TCU Combo for Canon comes with 12 Months Genuine Australian Warranty with Adeal.
Our products are sourced from authorised Australian suppliers and therefore come with genuine Australian warranty.
Camera Warehouse does not participate in 'Grey Market' or 'Parallel Import' activities.
|Power||Four size-AA alkaline or Ni-MH batteries, compatible external battery pack.|
|Modes||E-TTL and E-TTL II, Manual, and Multi Stroboscopic|
|Zoom||Auto and Manual Adjustments|
|Guide No||58/190 (at 105mm focal length, ISO 100 in meters/feet)|
|Flash coverage||24-105mm (14mm with wide angle diffuser panel)|
|Rotation||180 degrees both directions, Up-Down: -7 to 90 degrees.|
|FEC (Flash exposure compensation)||Manual|
|FEB (Flash exposure bracketing)||±3 stops in 1/3 stop increments (Manual flash exposure compensation and FEB can be combined)|
|Sync modes||First Curtain Sync, Second Curtain Sync, and High Speed Sync|
|Stroboscopic flash||Frequency:1-199Hz Number of flashes: 1-100|
|Flash exposure confirmation||Blue LED lamp lights up in E-TTL mode|
|Recycling time/Flash-ready indicator||Normal flash: Approx.0.1-5 sec./Red LED indicator lamp lights up.|
|Quick flash: Approx.0.1-2.5 sec./Green LED indicator lamp lights up.|
|Power saving||Non-wireless slave modes: 90 seconds, Wireless slave mode: (programmable) 10 minutes or 60 minutes|
|Transmission method||Radio Frequency and Optical pulse|
|Wireless options:||Odin Tx, Odin Rx, Strato II Rx, OP Tx (Master), OP Rx (Slave), OP Slave, OFF|
|Transmission range (Approx.)||Radio: 100m +, Optical: Indoors: 12-16m/39.3-52.4 ft., Outdoors: 7-9m/22.9-29.5 ft.|
|Reception angle||Radio: 360 ° all directions, Optical transmission:±40°(horizontal)，±30°(vertical)|
|Controlled groups||3 (A, B, and C)|
|Flash ratio control||1:8-1:1-8:1|
|Standby current||≤100uA in sleep mode|
|Dimensions||(L x W x H): 202.8×77.5×58.3 mm|
|Weight||427g (flash only, excluding batteries)|
|Groups||3 groups –A, B, C|
|Battery||2 x AA batteries (TCU and Receiver), 5V DC on receiver (external power port)|
|Voltage||2.4 – 3.2 V|
|Flash port voltage handling||≤300V(receiver)|
|Attachment||¼ tripod lug, cold shoe (Receiver)|
|Dimensions||94(L) x 66(W) x 35(H) mm, (Transmitter)|
|Weight||66g (receiver) – without batteries|
|Max sync speed||1/8000 sec|
|Output||Hot shoe, 3.5 mm port (Receiver)|
|Working Temperature||-15 ~ 65 C|
|Storage temp||-30 ~ 85 C|
|Signal input||USB port receiver|