- Does not come with Reflector
- 250W/s Monolight
- 8 Channel Skyport Receiver
- 0.27 - 1.02 Second @ 115V Recycling Time
- 1/ 2,762 Second Short Flash Duration
- 5.0 Stops Flash Variation Range
- Capable of Computer Control
- Capable of iPhone/iPad/iPod Touch Control
- Product Code 01.20440
- Pre-flash Detector System
- 12 Months Australian Manufacturers Warranty with Elinchrom
The Elinchrom BRX 250 Head With Protection Cap is a 250W/s Monolight with 90-260VAC multi-voltage system. It is used to manipulate and trigger your flash at distances up to 393' with your full control. It is capable of iPhone/iPad/iPod Touch Control or Computer Control. It features built-in with 8 Channel Skyport Receiver capable of handling 4 groups of flashes. BRX 250 Head provides fast 0.27 - 1.02 Second @ 115V Recycling Time with only 1/ 2,762 Second Short Flash Duration. This head also features 5.0 Stops Flash Variation Range and Pre-flash Detector System to enable the use of BRX with speedlights. BRX 250 has Product code 01.20440.
Product Features in Detail
Most comprehensive synchronisation and control
Skyport delivers the most comprehensive synchronisation and control, and it’s unique to the whole Elinchrom system. Your creative edge in lighting.
Pre-flash detector system
Intelligent pre-flash detector system enables the full use of BRX 250 / 500 with speedlights.
5V sync socket for maximum protection of digital cameras.
Temperature controlled cooling fan.
Visual Flash Confirmation
Visual Flash Confirmation option
Modelling lamp switch
The modelling lamp switches off/on to confirm the flash has been triggered.
Adjustable proportionality of the modelling lamp range.
Variable f-stop steps
1/1, 1/2, 4/10, 1/3, 2/10 or 1/10 steps are available.
Programmable ready beep tone.
Complete range of light modifiers
The accessory bayonet accepts the complete range of light modifiers.
7 mm umbrella shaft
Centred 7 mm umbrella shaft enables also the use of the unique Elinchrom Deflector set.
Stand bracket with additional umbrella
Stand bracket with additional umbrella fitting for larger umbrella shafts.
User replaceable plug-in flashtube.
90-270 V (excluding modelling lamp).
Included in the Box
Elinchrom BRX 250 Head With Protection Cap
Flashtube (250/500 W/S) for BXRi and Quadra A Flash Heads
Modeling Lamp - 100 watts/90 volts - for EL250, EL250C
PC to 3.5 mm Sync Cord (16'/5.0 m)
Protective Cap for Glass Dome, for Elinchrom
12 Months Australian Manufacturers Warranty with Elinchrom
This Elinchrom BRX 250 Head With Protection Cap comes with 12 Months Australian Manufacturers Warranty with Elinchrom.
Our products are sourced from authorised Australian suppliers and therefore come with genuine Australian warranty.
Camera Warehouse does not participate in 'Grey Market' or 'Parallel Import' activities.